Western Digital Firmware Problems

London and Manchester, UK
0870 140 2525

Data recovery from Western Digital drives with firmware corruption

Families: Typically, Western Digital Caviar models (WD...AB, WD...BB, WD...JB), where '...' are various numeric combinations eg.
WD400JB, WD800JB, WD1200JB, WD1600JB, WD2000JB, WD2500JB, WD3000JB, WD3200JB
WD200BB, WD400BB, WD800BB, WD1200BB, WD1600BB, WD200BB, WD2500BB

Failure Symptoms: At power on the hard drive will often

  • Fail to be recognised by the PC BIOS when the computer is powered on
  • No obvious failure noises
  • An error message informing the user that the PC can not find the hard disk will then be generated and the system will halt.

Cause: An apparent firmware corruption is responisible for the failure of the hard drive. Frequently, Data Clinic are able to fully recover drives suffering from type of problem.

What if I have one of these drives but the symptoms are different?: This is quite possible, they are still prone to all the other problems hard disks suffer from ie. mechnical failure, logical failure, bad sectors etc.  View further information on Western Digital hard disk failures.

What should I do?: Call the Data Clinic and talk your problem through with us on 0870 140 2525, or fill out our auto-form and we'll call you back

> Firmware corruption on Maxtor hard disks
> Firmware corruption on Fujitsu hard disks
> What is hard drive firmware & what does it do ?

> Visit the MAIN laptop data recovery section
> Back to the MAIN data recovery page

Please note that all modern hard disk drives are manufactured to very high standards, fail infrequently and have very similar rates of reliability.

(c) Copyright Data Clinic

western digital caviar sata hard disk drive
A Western Digital Caviar SATA drive