Maxtor hard disk data recovery

Data recovery Maxtor

London and Manchester, UK
0870 140 2525

Data Recovery from Maxtor hard disk drives

Hard disks manufactured by Maxtor are in all probability the most common in today's UK marketplace. Fast, reliable and quiet, popular Maxtor models include the slimline 2B020H1, Fireball 3, DiamondMax Plus 8, and DiamondMax Plus 9 series.

Maxtor hard disk failure - Data recovery information

Example Models:

Maxtor DX541 (also known as 2B020H1), Fireball 3, DiamondMax Plus 8, DiamondMax Plus 9, DiamondMax 10, MaXLine II

Symptoms: Like all hard disks, Maxtor drives will fail in a variety of ways. Documented below are symptoms we have found specific to Maxtor hard disk drives:

Electronic: An electronic fault may develop on the controller board - this is often caused by the spindle motor. The failure will often involve multiple components. With failures of this type the drive will appear dead and not be recognised by the BIOS. We have produced an example PDF document that further details an example electronic failure on Maxtor DiamondMax Plus 9 hard disk drives

Firmware: This is the microcode that makes the drive function correctly. Sometimes it is prone to corruption which makes the drive (and data on it) inaccessible. Drives with firmware corruption will often have some of the following symptoms:
- be recognised incorrectly in the BIOS, the computer will then often hang
- not be recognised at all in the BIOS
- run slowly make a regular ticking noise at start up

For further specific information regarding the symptoms of Maxtor drives that fail due to corruption of the firmware zone:

Failure symptoms on all SLIMLINE Maxtor hard disks (541DX family, Fireball 3 family, DiamondMax Plus 8 family)
> Read our specific page on Maxtor G-List firmware corruption
> Read our specific page on Maxtor drives with sector boundary problems

Failure symptoms on the MAXTOR DIAMONDMAX PLUS 8 family of hard disks
Failure symptoms on the MAXTOR DIAMONDMAX PLUS 9 family of hard disks
Failure symptoms on the MAXTOR DIAMONDMAX 10 family of hard disks

Please Note: Hard disks made by every manufacturer are subject to these problems. Maxtor hard disks are no more prone to developing them than any other manufacturers hard disk. We are able to provide more comprehensive information for Maxtor hard disk firmware zone failures because in many cases, the symptoms are much more specific and identifiable.

Mechanical - Please see our general Hard disks - mechanical failure section

Logical - Please see our general Hard disks - logical failure section

Recovery possibilities: Data Clinic are often able to perform a full data recovery
Please call us on 0870 7424 008

What should I do?: Call the Data Clinic and talk your problem through with us on 0870 7424 008, or fill out our auto-form and we'll call you back

> Firmware corruption on Western Digital hard disks
> Firmware corruption on Fujitsu hard disks
> What is hard drive firmware & what does it do ?

> Back to the MAIN data recovery page

Please note that all modern hard disk drives are manufactured to very high standards, fail infrequently and have very similar rates of reliability.

A Maxtor DiamondMax Plus 9 - cheap and available with huge storage capacities, these are very common drives.

Data recovery on Maxtor hard disks
A Maxtor 2B020H1 (541DX family) hard disk - available in 10Gb, 15Gb and 20Gb sizes, these are popular drives.